Most of the time, fans don’t have to spend a ton of money on all-inclusive CPU coolers. On the contrary, the most affordable solutions can make a decent impression—as long as the manufacturer uses good materials and cool and quiet fans. Today, we will check out 8 CPU coolers that are worth your attention.
We put together a list of the best TR4 CPU Coolers: 8 Air Coolers and AIOs Tested  Although the TR4’s support for a seventh core was a welcome addition, we were disappointed that the accompanying cooler did not stand out. Fortunately, several new coolers have appeared, and we have taken the time to test them out in our testing lab.
The TR4 is a new CPU socket that was introduced by AMD in early 2019. Since then we’ve seen a lot of coolers designed for the new socket, including AMD’s own Wraith Max and Threadripper SOC+, as well as many from third party manufacturers. So, which air cooler is the coolest and best, and which of the AIOs is the best?
You are not alone if you are perplexed when looking for the best TR4 socket CPU cooler for your PC.
Despite the fact that the CPU cooler market is crowded, only a few models support AMD Ryzen Threadripper CPUs.
Are you in a hurry? Take a look at my top-rated TR4 cooler.
After hours of searching and study, I was able to compile a list of the finest TR4 socket compatible CPU coolers available.
This article will serve as a thorough reference to the finest Threadripper CPU coolers, highlighting all of the differences and advantages.
So, to discover the best CPU cooler for the TR4 socket, read the whole article.
Also, for your chassis, see our expert-recommended best low-profile cpu cooler.
Best TR4 Socket CPU Coolers is a list of the best TR4 Socket CPU Coolers.
AMD’s Ryzen Threadripper CPUs are a series of very powerful processors that are mainly used for productivity activities such as operating servers and editing high-resolution movies.
Due to their large core counts and higher transistor counts, these CPUs generate a lot of heat. You will not be able to obtain the optimum performance that you anticipate from the CPU if they are not properly cooled.
It would obstruct your productivity, and you would not get the full benefit of these costly CPUs. To get the best performance out of it and make it survive longer, you’ll need a TR4 socket compatible CPU cooler.
The following are the top eight best TR4 CPU coolers:
1. FRYZEN IN THE DEEP COOL
The DEEPCOOL FRYZEN is one of the most cost-effective ways to keep a Ryzen Threadripper CPU cool.
The DEEPCOOL FRYZEN has the following features:
- The top cover and fan frame have ARGB on them.
- there are six heat pipes
- 120mm inverted double-bladed fan
- includes a cable controller
- broad copper base 68x46mm
Check out the current price of DEEPCOOL FRYZEN.
The design and RGB of this CPU air cooler are the most striking features. The fan is distinguished from conventional CPU coolers by an aluminum top cover and a frame. It provides the cooler a distinct appearance that complements gaming setups.
This top cover and frame have addressable RGB built in. If a 5V 3-pin ARGB header is present on the motherboard, it may control the RGB lights. If your motherboard doesn’t have an ARGB header, an ARGB controller is included.
The RGB is well-synchronized with the rest of the computer, and it can be controlled through the motherboard software. The fan is a 120mm inverted double-bladed fan that performs well.
Compatibility is another important feature of the DEEPCOOL FRYZEN. It supports a wide range of AMD sockets, including AM4 and TR4. As a result, you may utilize it with other AMD Ryzen processors as well.
Let us now turn our attention to performance.
The DEEPCOOL FRYZEN has a good performance. It operates well enough that your Threadripper CPU does not experience heat throttling. There are alternative coolers available that cool the CPU more aggressively, but they are more expensive.
Also, don’t forget to have a look at our best fanless CPU cooler if you want to run your PC quietly.
At idle or medium loads, the fan makes relatively little noise. However, at full load, it is very loud. Because it has a very thin design and the heatsink is in the middle, unlike other CPU coolers, it offers RAM module, PCIe, and heatsink clearance for most motherboards.
The DEEPCOOL FRYZEN offers wide compatibility and performance for the price, not to mention a distinctive design with addressable RGB.
- »affordable price
- »reasonable cooling
- RGB-addressable RGB-addressable RGB-addressable RGB
- »compatible with the vast majority of AMD sockets
- »Most PC cases have no clearance problems
- »can be very noisy when fully loaded
2. Masterliquid ML240P Mirage from Cooler Master
One of the most distinctive-looking processor pumps is the Cooler Master Masterliquid ML240P Mirage.
The Cooler Master Masterliquid ML240P Mirage has the following features:
- 2x ARGB 120mm fans
- Aluminium radiator with a diameter of 240mm
- Pump with a transparent top and a PWM motor
- Thermal compound MasterGel Pro
- Included is a Cooler Master ARGB controller.
- ARGB pump with transparency
Masterliquid ML240P Mirage ML240P Mirage ML240P Mirage ML240P Mirage ML240P Mirage ML240P Mirage
The translucent processor block is the first thing that will catch your eye here. You can see the liquid and the pump in operation through the top of the CPU pump. It offers a fantastic visual experience, especially when combined with addressable RGB.
ARGB was also applied to the two radiator fans. They’re 120mm fans that provide plenty of airflow to the 240mm radiator. This AIO’s cooling performance is excellent. It has the ability to cool high-end CPUs such as AMD’s Threadripper series.
Having stated that,
Threadripper CPUs aren’t the only ones supported by the Cooler Master Masterliquid ML240P Mirage. Instead, the AIO supports many Intel and AMD sockets. This CPU cooler has a reasonable level of durability. The tubing is made of FFEP, which is very robust, and the other components, such as the pump and the radiator, have a quality feel to them.
This month, check out the award-winning best nzxt aio cooler.
The pump has a revolutionary dual-chamber design that improves performance while reducing noise. It also works. This cooler has a relatively low noise level. The AIO only makes a whirling noise when the CPU is under heavy strain, but this is to be anticipated.
As an added bonus:
If your motherboard doesn’t have an ARGB header, you’ll receive a Cooler Master lighting controller in the package.
Overall, the Cooler Master Masterliquid ML240P Mirage will be a great option for anybody seeking for a new, fresh design while still getting top-notch CPU performance.
- »distinctive pump design
- »simple to install
- »quiet environment
- »Excellent for ARGB
- »doesn’t provide the greatest cooling results
3. DEEPCOOL Castle 360EX RGB DEEPCOOL Castle 360EX RGB DEEPCOOL Castle 360EX
The DEEPCOOL Castle 360EX RGB is an AIO that combines excellent performance with a pleasing appearance.
The DEEPCOOL Castle 360EX RGB’s top features include:
- 360-millimeter liquid cooler
- RGB lighting is a kind of lighting that uses three that can be controlled
- technology that prevents leaks
- 3x PWM 120mm fans
- AMD TR4 / Intel LGA 1200, 1151 sockets are supported.
Check out the current price of DEEPCOOL Castle 360EX.
The TR4 CPU cooler ensures that the processor is properly cooled. Even while under heavy demand, the AIO keeps the CPU temps down.
Because Threadripper CPUs are designed for high performance, they become heated fast. As a result, the cooler’s excellent thermal performance is unquestionably a plus.
PWM is used on the three 120mm fans, and the fan speed can be increased to 1800 RPM, delivering powerful airflow to the radiator with a 360mm diameter. The pump features a 3-phase motor and a dual-chamber construction. They’ve been fine-tuned for optimal liquid flow and cooling.
The DEEPCOOL Castle 360EX RGB is also visually appealing. The processor pump is visually stunning, and it also contains ARGB lights. If you have an RGB PC, the ARGB makes the AIO CPU cooler an ideal option. The aesthetics will be taken to a whole new level.
Don’t forget to look at the finest noctua cpu cooler on the market as well.
Here’s where it gets interesting:
Anti-leak technology is included into the liquid CPU cooler. To manage flow and limit damage, it controls system pressure balance. That is a really useful feature.
With support for AMD Threadripper and Intel LGA 1200 and 1151 sockets, this AIO has a lot of compatibility.
Overall, I would suggest the DEEPCOOL Castle 360EX RGB to anybody seeking for an excellent ARGB and cooling combo.
- »amazing cooling
- »Excellent build quality with lightweight aluminum structure
- »gorgeous-looking ARGB
4. GIGABYTE AORUS RGB AIO Liquid Cooler 360 GIGABYTE AORUS RGB AIO Liquid Cooler 360 GIGABYTE AORUS
The GIGABYTE AORUS RGB AIO Liquid Cooler 360 has a beautiful LCD at the CPU block.
The GIGABYTE AORUS RGB AIO Liquid Cooler 360 has the following features:
- radiator with a 360mm diameter
- 3x PWM 120mm fans
- circular LCD that may be customized
- RGB lighting
- AMD Ryzen TR4, AM4, and Intel 115X/2066 processors are supported.
Check out the current price of GIGABYTE AORUS RGB.
Gigabyte did a great job of designing the AIO with an LCD screen at the processor pump top. It provides a stunning visual experience and allows you to customize it to your liking. You can put system performance data or your images/text to make it as personal as possible.
The triple 120mm PWM fans on the radiator with a 360mm diameter assist to disperse heat. The fan blades are designed differently to aid in aerodynamics. It is able to offer greater airflow while producing less noise. You may be certain that the AIO’s noise levels will not cause you any discomfort.
Also, have a look at the quietest CPU cooler we’ve tested for your PC.
When it comes to the construction,
The CPU cooler is made of high-quality materials. Because of its high quality throughout, the AIO will appeal to any gamer. It’s a compelling option because of its quality construction and excellent looks.
The GIGABYTE AORUS RGB AIO Liquid Cooler 360’s main flaw is the accompanying software. It’s very buggy and difficult to use. Apart from that, this CPU liquid cooler is a good performer.
- »premium construction
- »At the CPU pump, there’s an LCD
- »Mostly deafening silence
5. Enermax Liqtech TR4 II 360 Enermax Liqtech TR4 II 360 Enermax Liqtech TR4
The Enermax Liqtech TR4 II 360 is an AIO that can effectively cool some of the market’s most powerful Threadripper CPUs.
The Enermax Liqtech TR4 II 360 has the following features:
- 360mm radiator
- Supported sockets: sTRX4/TR4/SP3
- ARGB on the CPU
- Support for TDPs of 500W and higher
- IHS coverage for sTR4 is 100%.
- Technology for Shunt Channels
- Twister Bearing Technology is a kind of bearing that uses a
- Premium woven tubing with a 400mm diameter composed of long-lasting polyamide rubber.
Check the current price of Enermax Liqtech.
The TDP support of the Enermax Liqtech TR4 II 360 is 500W+, which is crazy. While such high TDP CPUs are unlikely to be found, knowing that you have something that can handle much more than you need is comforting.
One of the greatest features of this cooler is that it has 100% sTR4 IHS coverage. It implies that the nickel cold plates on top of your Threadripper CPU cover the full length and breadth of the internal heat spreader. It guarantees that all components of the CPU are properly cooled.
For improved efficiency and high flow rate, the CPU pump has a dual-chamber EF1 design. The top has ARGB illumination, which you may control using the supplied ARGB controller or the ARGB connector on your motherboard.
Don’t forget to compare the finest dark rock pro 4 cpu cooler options.
So, how does it appear?
The RGB looks fantastic, and it takes the system’s appearance to a whole new level. Because the three 120mm fans include rubber pads to reduce vibration, they make considerably less noise.
The Enermax Liqtech TR4 II 360 has Shunt Channel Technology, which is a patented Enermax Liqtech Liqtech Liqtech Liqtech Liqtech Liqtech Liqtech Liqtech Liqtech Li Its goal is to minimize the Boundary Layer effect and guarantee that heat is dissipated evenly over the whole surface area.
Finally, despite the poor build quality, the product is covered by a five-year guarantee. So, if it leaks or malfunctions, you may replace it with a new one.
To summarize, the Enermax Liqtech TR4 II 360 comes with a slew of innovative innovations and features.
- »Excellent cooling results
- »ARGB on the CPU
- »strong TDP support
- »prolonged guarantee
- »The construction quality is poor.
6. MasterLiquid ML360 Mirror by Cooler Master
The Cooler Master Masterliquid ML360 Mirror TR4 version is Cooler Master’s finest closed-loop AIO.
The Cooler Master Masterliquid ML360 Mirror has the following features:
- 360mm radiator
- ARGB on the pump and an infinity mirror
- 3 × 120mm SickleFlow fans
- ARGB controller that is wired
Check out the current MasterLiquid ML360 Mirror price.
The cooler has a 360mm radiator, which is an upgrade over the previous model. The aluminum fins have been increased by 25%, resulting in greater surface area for heat dissipation and better efficiency.
The front of the pump has a fantastic endless mirror design. When you switch on the ARGB, it looks much better.
The CPU block on the Cooler Master Masterliquid ML360 Mirror TR4 version features addressable RGB. It gives the entire product a great look. By connecting the ARGB to the ARGB header on your motherboard, you can control it. It works with a wide range of software.
It comes with an ARGB controller out of the box if you don’t have an ARGB header. The pump is a third-generation model with a dual-chamber configuration for high flow rates.
Also, have a look at our list of the top cooler master cpu coolers, as suggested by our experts.
Fans, on the other hand,
Three 120mm SickleFlow fans are included. These fans have a revolutionary blade design that enables them to generate greater static pressure while producing less noise.
The installation procedure may be a little challenging. Other CPU liquid coolers that are simpler to install are available.
Overall, the Cooler Master Masterliquid ML360 Mirror TR4 edition is a good AIO for Ryzen Threadripper CPUs that looks beautiful and performs well.
- »Amazing ARGB lights
- »excellent aesthetics
- »consistent cooling results
7. AMD Cooler Master Wraith Ripper is a character from the game Wraith Ripper
The AMD Wraith Ripper from Cooler Master is one of the finest air coolers for the AMD Ryzen TR4 Threadripper socket.
The Cooler Master AMD Wraith Ripper has the following features:
- With a twin tower heatsink, there are there are seven heat pipes.
- Air-Guide for Wraith Armor with ARGB and logo
- 1x PWM 120mm fan is supplied.
- Wraith ripper RGB software built-in
Check AMD Wraith Ripper’s current price.
The first thing you’ll notice is how large the air cooler is. It is 150mm long, 132.3mm wide, and 160.5mm tall. You’ll need to make sure it matches your motherboard’s massive size and doesn’t interfere with or rub against anything.
However, since it’s designed for AMD Ryzen Threadripper CPUs, it’ll work with most motherboards. With its enormous size comes tremendous performance gains.
For effective heat transmission, the Cooler Master AMD Wraith Ripper features a twin tower heatsink with seven huge heat pipes. The CPU base plate’s enormous surface area guarantees that all components of the processor are protected.
The Wraith Armor Air-Guide, which is basically a cover that fits over the heatsink and the fan to guide the airflow, is a unique feature of this air cooler. It ensures that there are no dead heat spots and that all components get sufficient airflow for optimal cooling efficiency.
Here are some amazing budget best cpu cooler for overclocking if you want to overclock your CPU.
When it comes to the aesthetics of things,
The Wraith Armor has two ARGB LED strips that light up the Armor as well as the Ryzen Threadripper logo on top. There’s also built-in ARGB software that makes controlling the lights a breeze.
The ARGB lights, as well as the top armor cover with the Threadripper logo, look fantastic and draw attention.
Inside the armor, a 120mm PWM fan can spin up to 2750 RPM, which is more than enough to keep the heatsinks cool.
The only drawback is that, although being built especially for the TR4 socket, the cooler is a little difficult to install.
To summarize, the AMD Wraith Ripper from Cooler Master is a fantastic air cooling option for your Ryzen Threadripper CPU that can withstand high loads and overclocking.
- »Extremely effective cooling
- »created specifically for the TR4 platform
- »attractive to the eye
- »cost-effective cooling solution
- »fan with a high RPM
- »can be a little difficult to set up
8. Keep your mouth shut! Pro Dark Rock
Be quiet, please! The Dark Rock Pro TR4 is the quietest CPU air cooler available for AMD Ryzen Threadripper processors.
The best parts of the be silent! TR4 Dark Rock Pro:
- Support for 250W TDP
- TR4/sTRX4 connectors are supported
- 1x 120mm PWM Silent Wings 3 fan
- 1x 135mm PWM Silent Wings fan
- seven heat pipes
- motors with six poles that run smoothly
Dark Rock Pro’s current price may be found here.
The noise level of this air cooler is its major selling feature. It barely generates 24.3dB of sound even when fully loaded. When you consider that it cools a powerful and hot Threadripper CPU with two fans going, that’s amazing.
Be quiet, please! Silent Wings has two fans in the Dark Rock Pro TR4. Between the two heatsinks is a 135mm PWM fan, with a second 120mm Silent Wings 3 PWM fan in the front.
The front fan generates a high static pressure for optimal cooling thanks to the funnel-shaped air intake. For optimum and quiet cooling, both fans feature fluid dynamic bearings and airflow optimized fan blades.
With wave-contoured aluminum fins and a distinctive black ceramic coating, the twin heatsinks are also tuned. All of this adds to a cooling system that is both efficient and quiet.
It can cool a CPU with a maximum TDP of 250W, which complements AMD’s Threadripper architecture well.
Don’t forget to look at our list of the finest CPU coolers for the LGA 1200 socket.
In terms of compatibility,
The air cooler is very large. Despite its massive size, it has recessed fins and a 120mm front fan. It provides adequate space to accommodate RAM modules that are somewhat higher than usual.
The CPU cooler has a length of 146mm, a width of 136mm, and a height of 163mm. Make sure you have enough space to accommodate this monster.
The installation procedure is simple and straightforward since it is built especially for one socket.
In general, the be silent! The Dark Rock Pro TR4 is a fantastic air cooler that provides excellent Threadripper CPU cooling at an unmatched low noise level.
- »Excellent cooling capabilities
- »In comparison to its cooling capacities, it is very quiet.
- »additional cooling for AMD Ryzen Threadripper processors
- »may not fit in certain computer cases
So, which TR4 socket CPU cooler do you think is the most suitable for your needs?
If I had to pick an air cooler, I’d go with the Cooler Master AMD Wraith Ripper because of its excellent cooling capabilities and the fact that it’s specifically designed for AMD Ryzen Threadripper CPUs.
If I had to pick amongst the liquid coolers on this list, I’d go with the Cooler Master MasterLiquid ML360 Mirror TR4 Edition, which is intended to operate with Ryzen Threadripper processors straight out of the box.
If you are looking for the most efficient way to cool your TR4 CPU, look no further than the best AIO coolers on the market. And since we have already tested the best air coolers from all of our TR4 CPU cooling tests, let’s take a look at the best AIOs.. Read more about best aio for 3990x and let us know what you think.
Frequently Asked Questions
What is the best CPU cooler 2021?
The best CPU cooler for 2021 is the Noctua NH-D15S.
Are AIOs better than air?
AIOs are better than air, but not as good as a closed system.
Whats the quietest CPU cooler?
The Corsair H100i v2 is the quietest CPU cooler.