Cooler Master Hyper 212 LED Turbo is a great CPU cooler for the price. It’s not as good as some of the more expensive coolers, but it’s still an excellent choice for those who are looking to buy a budget CPU cooler.
The hyper 212 led turbo white edition is a cooler master product. It has an LED light that can be turned on or off.
When the new AM4 platform was introduced, Cooler Master released this new cooler. The popularity of the Cooler Master Hyper 212 EVO necessitated the development of a solution for the AM4 socket. As a result, it needs to be improved and changed as well. This cooler is similar to the previous one, but it performs better and costs a bit more. Let’s see whether this cooler can pique the interest of Am4 platform users.
Specs:-
Name of the product | LED Turbo Hyper 212 | ||
Number of the model | RR-212TK-16PR-R1 RR-212TK-16PR-R1 RR-212TK-16PR (Black Top Cover) | RR-212TR-16PR-R1 RR-212TR-16PR-R1 RR-212TR-16PR (Red Top Cover) | |
Socket for the CPU | LGA 2066 / 2011-3 / 2011 / 1366 / 1156 / 1155 / 1151 / 1150 / 775 Intel® LGA 2066 / 2011-3 / 2011 / 1366 / 1156 / 1155 / 1151 / 1150 / 775 Intel® LGA 2066 / 2011-3
AMD® AM4 / AM3+ / AM3 / AM2+ / FM2+ / FM2 / FM1 socket AMD® AM4 / AM3+ / AM3 / AM2+ / FM2+ / FM2 / FM1 socket AMD® AM4 / AM |
||
Measurements (L x W x H) | 4.7 x 4.3 x 6.4′′ (120 x 108 x 163 mm) | ||
Heat Sink | Measurements (L x W x H) | 4.7 x 2.4 x 6.3′′ (120 x 60 x 160 mm) | |
Material | 4 Heat Pipes / Direct Contact Aluminum Fins | ||
Weight | 468g | ||
Dimensions of Heat Pipes | Ø6mm | ||
Fan | Measurements (L x W x H) | 4.7 × 4.7 x 1′′ (120 x 120 x 25 mm) | |
Speed | ten percent at 600-1,600 RPM | ||
Airflow | 66.3 CFM (plus or minus 10%) | ||
Pressure in the Air | 10 percent 1.7 mmH2O | ||
MTTF | 40,000 hours of work | ||
The Level of Noise | 9-31 dBA | ||
Connector | 4-Pin | ||
Specified Voltage | 12 VDC | ||
Currently rated | 0.19 A | ||
Consumption of energy | 2.28 W | ||
Warranty | 2 years | ||
EAN Code | 4719512054130 | 4719512054147 | |
UPC Code | 884102030239 | 884102030246 |
Look into Amazon.
Unboxing
The packaging was standard, and the components were neatly packaged. The cooler came with pre-installed fans and a separate package for the accessories, as is customary with Cooler Master coolers. There was a single bracket for Intel and AMD AM4 sockets, two clips for Intel sockets, two clips for AM4 sockets, and one separate conventional clip for prior AMD sockets in the accessories package. The package also included a tiny bottle of thermal paste, as well as all of the necessary screws and nuts for installation.
When both fans are fitted, the cooler is large enough. The top of the heatsink has a red aluminum cover with the Cooler Master LOGO, which is also available in black.
When it comes to the heatsink, it isn’t very impressive, but the craftsmanship is commendable. The base is made up of both aluminum and copper heat pipes, while the fins are made of aluminum. The base is well-finished and smooth, with a total of four copper heat pipes running through it from one side to the other. The heat pipes reach to the top of the heatsink and evenly distribute the heat. The heat pipes required to be in close touch with the base since it transmits heat rapidly and the tiny aluminum base isn’t very effective at removing heat from the processor on its own.
When it comes to the fans, they’re the typical airflow fans that can be found in most Cooler Master heatsinks and have the same design. They’re sturdy and feature RED LEDs to match the cooler’s red accent. It justifies the usage of two Fans for a price of less than $50 since there will be a decent push-pull arrangement. The fans can be simply removed and installed, and they may be linked to the cable splitter included in the package to power two fans from a single motherboard 4 pin power connection.
[nextpage title=”Setup and Testing Rig”]
Before installation, I cleaned the base of the heatsink with isopropyl alcohol to remove the previous thermal paste from my i5 6600K, since the sticky plastic left some sticky residue on it. I started by mounting the bracket from behind and securing the two Clips with two screws. It was extremely simple, and the accessories package included a nut bolt tightener that made tightening the hollow bolts into the motherboard a breeze, as seen in the image above.
To avoid any problems, I removed the two fans from the heatsink before putting it on the motherboard, as well as the RAM sticks. The cooler was then fastened using the screws that were pre-installed in the clips, and I was finished. When I put the Corsair Vengeance LPX Ram in the 2nd and 4th DIMM sockets, there was adequate space for the fans. I don’t believe you can put a longer RAM stick in the first DIMM slot, so make sure you get one that’s shorter than mine.
To power the fans, I utilized the fan splitter cable that came with the cooler and a single 4 pin power connector on the motherboard called CPU Fan header.
Because my case is broad enough, there was enough space to shut the side panel, but this will be the case with most mid towers because the height is 163mm, which is quite common. The RED LEDs were brilliant, but not of the same high quality as a premium fan’s.
Here’s the RIG I used to test the cooler (I use the same rig for all of them so the results are consistent):-
Check out the Intel Core i5 6600K on Amazon.
Amazon has the Asus Z170 Pro Gaming.
Corsair Vengeance LPX 2x 4GB DDR4 2400Mhz: Check Amazon
Amazon has a 320GB WD HDD.
Check out Amazon for the TP-Link N300 Wifi PCI Card.
Check out Amazon for the Cooler Master MasterWatt Lite 500W.
Check out Amazon for the Cooler Master 690 III.
1x 120mm Corsair AF fan: For further information, see the Amazon link at the bottom of the page. 1x DeepCool TF120 120mm fan (from radiator): Look into Amazon.
[nextpage title=”Benchmarks and Summary”]
I used the HeavyLoad program to test the CPU cooler at 100% load on various clocks, then allowed it 5 minutes to cool down with maximum fan speed after each test until it was stable at its lowest idle temperature of 33 degrees Celsius (Same as the room temperature at the time of testing). Each test lasted around 15 minutes, and the results of this test in degrees Celsius are shown below. With the help of CPUID HWMonitor, we were able to measure fan speed and CPU temperature.
The temperatures were ideal and beneficial to the processor. Expect the temperature to be around 50C if a non-overclocker uses this cooler on his CPU at full load with the lowest or standard fan speed, however the fans came up to work very well when they were operating at maximum power. The temperature dropped to 6C at both 3.5Ghz and 4.5Ghz, although there was some noise. It wasn’t at all upsetting, however. From 1 meter away, there was virtually no noise at silent profile with about 670RPM speed, and this item is extremely quiet even if the side panel is removed.
[rwp box id=”0′′] rwp box id=”0′′] rwp box
–Understand the significance of these honors
The rr-212tk-18pa-r1 is a cooler that has been designed for use with Intel’s LGA 1155 and LGA 1156 sockets. It features four heat pipes, an aluminum fin stack, and two 120mm PWM fans.
Frequently Asked Questions
Is Cooler Master Hyper 212 led good?
The Cooler Master Hyper 212 LED is a good cooler. It has an average cooling performance, but it is reasonably priced.
Is the Cooler Master Hyper 212 good for overclocking?
The Cooler Master Hyper 212 is a good CPU cooler for overclocking.
Is Cooler Master Hyper 212 EVO enough?
Cooler Master Hyper 212 EVO is a very good cooler, but it might not be enough for overclocking your processor. You should consult with the manufacturer of your motherboard to determine what type of cooling system they recommend.
Managing and running (mostly) successfully multiple eCommerce lines of Business. Writing enthusiastically for the past 7 years. In between loves to travel and explore worldwide culture.